2108 is a cost effective, 1 RU chassis and multi-service WDM transmission platform which provides 8 wavelengths for point to point application, or 4 wavelengths ring application per device, more wavelengths application is possible by stacking multiple boxes at each location. Each channel port supports bit rate from 1Gb/s to 10Gb/s. It integrates 3R (CDR) for every channel to get better performance. LLF and TX sync functions are also supported, and can be configured by software. It supports 1+1 optical channel and optical line protection. It is stackable for future expansion. 2108 complies with standard of ITU G.709, FCC, RoHS and VCCI.

FLY 1000R Series Optical Transform Unit is a high performance, low-power optical transmission system unit, mainly for optical regeneration, re-amplifying, re-shaping the signals in the transmission process. It can save optical fiber resources and networking cost effectively, and solves the problem that the transmission distance is too long to transmit. With advantages of small volume optical signal, economy and safety, convenient construction and etc., it is widely used in various optical transmission fields and long-distance trunk transmission.

FLY 1000R Series Optical Transform Unit is a high performance, low-power optical transmission system unit, mainly for optical regeneration, re-amplifying, re-shaping the signals in the transmission process. It can save optical fiber resources and networking cost effectively, and solves the problem that the transmission distance is too long to transmit. With advantages of small volume optical signal, economy and safety, convenient construction and etc, it is widely used in various optical transmission fields and long-distance trunk transmission.

Optical line protection system is combined of OLP-Optical Line Protection and operation maintenance terminal. It can realize optical power monitoring、optical line auto-switching and network management etc. In optical communication network, OLP monitors optical power of optical fiber and standby optical fiber at real time. In case the current optical power of optical fiber is less than pre-set switching threshold value, then alarm is on and it would switch to standby optical fiber automatically to protect optical transmission system line. OLP can provide a protection scheme for all routes and main lines easily with low cost, can protect all networks which needs optical line switching, all these above can make an optical communication network with no-block、high reliability、safety and high anti-disaster strength.

DCM Dispersion Compensator has the capability of slope compensation which can supply the broad-band dispersion slope compensation for SMF-28 fiber (G.652) in whole C-band to optimize the system residual dispersion. With the mature and reliable optical fiber processing, the performance of optical transmission system can be sharply improved. The dispersion range of 1550nm wavelength can achieve -10 ~ -2100ps/nm. Special requirements in central wavelength and dispersion can be provided.

Flyin Optronics’ FM-11 series Ethernet media converter can interconvert electrical signals of 10Base-T and 100Base-TX twisted pairs with optical signals of 100Base-FX. It extends the network transmission distance from 100m via copper cables to 120km via fiber optical cable. It enables the data to transmit in two different mediums of electrical and optical networks either by the technology of data link L2 store-and-forward, or by the one of PHY L1 cut-through). It supports transmission in multi-mode dual fiber, single-mode dual fiber, single-mode single fiber.