Description
Parameters
| Features | Applications |
| Low insertion Loss | Metropolitan Area Network |
| Wide Wavelength Range | R&D in Laboratory |
| High Stability, High Reliability | System Monitor |
| Epoxy-free on Optical Path | Configurable OADM |
| Low Crosstalk |
Performance Specifications
| Parameter | FY-D2×2B | |
| Wavelength Range（nm） | 670~980 | 1260~1650 |
| Operating Wavelength | 670/785/850/980 | 1310/1490/1550/1625/1650 |
| Insertion Loss（dB） | Typ:0.8 Max:1.2 | Typ:0.6 Max:1.0 |
| Return Loss（dB） | MM≥30?SM≥50 | |
| Crosstalk（dB） | MM≥30?SM≥55 | |
| Polarization Dependent Loss（dB） | ≤0.05 | |
| WaveLength Dependent Loss（dB） | ≤0.25 | |
| Temperature Dependent Loss（dB） | ≤0.25 | |
| Repeatability（dB） | ≤±0.02 | |
| Power Supply（V） | 3.0 or 5.0 | |
| Lifetime（time） | ≥10^7 | |
| Switch Time（ms） | ≤8 | |
| Transmission Power（mW） | ≤500 | |
| Operating Temperature(℃) | -20~+70 | |
| Storage Temperature(℃) | -40~+85 | |
| Weight(g) | 16 | |
| Dimension（mm） | （L）27.0×（W）12.0×(H)8.2(±0.2mm) customization is available. | |
1、Specifications may change without notice.
2、Above specification are for device without connector.
| Type | Pin | Electric Drive | Status Sensor | ||||||
| D2×2B | Optical Pin | Pin1 | Pin5 | Pin6 | Pin10 | Pin1 | Pin5 | Pin6 | Pin10 |
| Non-latching | P1-P3,P1'-P3' | -- | -- | -- | -- | Close | Open | Open | Close |
| P1-P4,P1'-P4',P3-P2,P3'-P2' | V+ | -- | -- | GND | Open | Close | Close | Open | |
| Specifications | Voltage | Current | Resistance |
| 5V latching | 4.5~5.5 | 36~44mA | 125Ω |
| 5V non-latching | 4.5~5.5 | 26~32mA | 175Ω |
| 3V latching | 2.7~3.3 | 54~66mA | 50Ω |
| 3V non-latching | 2.7~3.3 | 39~47mA | 70Ω |
Flyin Optronics’ D2×2B Mechanical Fiber Optic Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MMS fiberoptic switches are true switching solutions for optical networking applications.
| Mode： |
SM MM |
| Voltage Type： |
3V 5V |
| Control Model： |
Latching Non-Latching |
| Fiber Type： |
50/125 62.5/125 9/125 Custom |
| Fiber Diameter： |
250um 900um 2.0mm 3.0mm Custom |
| Fiber Length： |
1m 2m Custom |
| Connector： |
None FC/APC FC/PC SC/APC SC/PC ST ST/PC LC LC/APC Custom |
| Wavelength： |
850nm 1310nm 1490nm 1550nm 1625nm 1650nm 1310/1550nm Custom |
| Features | Applications |
| Low insertion Loss | Metropolitan Area Network |
| Wide Wavelength Range | R&D in Laboratory |
| High Stability, High Reliability | System Monitor |
| Epoxy-free on Optical Path | Configurable OADM |
| Low Crosstalk |
Performance Specifications
| Parameter | FY-D2×2B | |
| Wavelength Range（nm） | 670~980 | 1260~1650 |
| Operating Wavelength | 670/785/850/980 | 1310/1490/1550/1625/1650 |
| Insertion Loss（dB） | Typ:0.8 Max:1.2 | Typ:0.6 Max:1.0 |
| Return Loss（dB） | MM≥30?SM≥50 | |
| Crosstalk（dB） | MM≥30?SM≥55 | |
| Polarization Dependent Loss（dB） | ≤0.05 | |
| WaveLength Dependent Loss（dB） | ≤0.25 | |
| Temperature Dependent Loss（dB） | ≤0.25 | |
| Repeatability（dB） | ≤±0.02 | |
| Power Supply（V） | 3.0 or 5.0 | |
| Lifetime（time） | ≥10^7 | |
| Switch Time（ms） | ≤8 | |
| Transmission Power（mW） | ≤500 | |
| Operating Temperature(℃) | -20~+70 | |
| Storage Temperature(℃) | -40~+85 | |
| Weight(g) | 16 | |
| Dimension（mm） | （L）27.0×（W）12.0×(H)8.2(±0.2mm) customization is available. | |
1、Specifications may change without notice.
2、Above specification are for device without connector.
| Type | Pin | Electric Drive | Status Sensor | ||||||
| D2×2B | Optical Pin | Pin1 | Pin5 | Pin6 | Pin10 | Pin1 | Pin5 | Pin6 | Pin10 |
| Non-latching | P1-P3,P1'-P3' | -- | -- | -- | -- | Close | Open | Open | Close |
| P1-P4,P1'-P4',P3-P2,P3'-P2' | V+ | -- | -- | GND | Open | Close | Close | Open | |
| Specifications | Voltage | Current | Resistance |
| 5V latching | 4.5~5.5 | 36~44mA | 125Ω |
| 5V non-latching | 4.5~5.5 | 26~32mA | 175Ω |
| 3V latching | 2.7~3.3 | 54~66mA | 50Ω |
| 3V non-latching | 2.7~3.3 | 39~47mA | 70Ω |
Company Info
Service Support
Sub-link
Add：Deliwei Industrial Park, Longhua, Shenzhen, China 518109
Tel：+86-755-29048607/85250091/32939610/32939620
Fax：+86-755-29048624
Email：sales@opticres.com
EN
CN
