Description
Parameters
Flyin Optronics' 1x1 Mechanical Optical Switch is not affected by the polarization and wavelength. It supports all wavelength at 850nm and 1260nm~1650nm, and It provides high reliability, low insertion loss, fast switching speed and bi-directional performance. They are widely used for multiplex OADM, cross connectors OXC, system testing and protection.
| Features | Applications |
| Unmatched Low Cost | Optical Network |
| Low Insertion loss | Protection/Restoration |
| High Channel Isolation | Optical Singnal Routing |
| High Stability, High Reliability | Configurable Optical Add/Drop |
| Epoxy-free on Optical Path | Transmitter and receiver protection |
| Latching and Non-latching | Network Test System |
Mechanical Dimensions
Package Box Dimensions
Flyin’s size for 1x1 switch: 27×12×8.2mm, the package box size for it : 235x165x35mm. It can hold two pieces 1x1 switch.
Flyin’s label on top left corner: 50*30mm with product information and quantity.
Note: Package may change without notice, Flyin reserve all rights.
| Parameter | FY-1×1-MM/SM | |
| Wavelength Range（nm） | 850±40 | 1260~1650 |
| Operating Wavelength | 850 | 1310/1490/1550/1625/1650 |
| Insertion Loss（dB） | Typ:0.5 Max:0.8 | Typ:0.4 Max:0.6 |
| Return Loss（dB） | MM≥30 SM≥50 | |
| Crosstalk（dB） | MM≥65 SM≥70 | |
| Polarization Dependent Loss（dB） | ≤0.05 | |
| WaveLength Dependent Loss（dB） | ≤0.25 | |
| Temperature Dependent Loss（dB） | ≤0.25 | |
| Repeatability（dB） | ≤±0.02 | |
| Power Supply（V） | 3.0 or 5.0 | |
| Lifetime（time） | ≥10^7 | |
| Switch Time（ms） | ≤8 | |
| Transmission Power（mW） | ≤500 | |
| Operating Temperature(℃) | -20~+70 | |
| Storage Temperature(℃) | -40~+85 | |
| Dimension（mm） | （L）27.0×（W）12.6×(H)8.0 | |
1、Specifications may change without notice.
2、Above specification are for device without connector.
| Type | Pin | Electric Drive | Status Sensor | ||||||
| 1×1 | Pin1 | Pin5 | Pin6 | Pin10 | Pin2-3 | Pin3-4 | Pin7-8 | Pin8-9 | |
| Latching | P1-P2 | V+ | GND | -- | -- | Open | Close | Close | Open |
| Light close | -- | -- | GND | V+ | Close | Open | Open | Close | |
| Non-latching | P1-P2 | V+ | -- | -- | GND | Open | Close | Close | Open |
| Light close | -- | -- | -- | -- | Close | Open | Open | Close | |
| Status One | Status Two |
 |  |
| Specifications | Voltage | Current | Resistance |
| 5V latching | 4.5~5.5 | 36~44mA | 125Ω |
| 5V non-latching | 4.5~5.5 | 26~32mA | 175Ω |
| 3V latching | 2.7~3.3 | 54~66mA | 50Ω |
| 3V non-latching | 2.7~3.3 | 39~47mA | 70Ω |
Flyin Optronics' 1x1 Mechanical Optical Switch is used to turn on and turn off optical signal. The 1x1 Mechanical Optical Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical network in near future.
| Mode： |
SM MM |
| Voltage Type： |
3V 5V |
| Control Model： |
Latching Non-Latching |
| Fiber Type： |
50/125 62.5/125 9/125 Others |
| Fiber Diameter： |
250um 900um 2.0mm 3.0mm Others |
| Fiber Length： |
1m 1.5m Others |
| Connector： |
None FC/APC FC/PC SC/APC SC/PC ST/PC LC/PC LC/APC Others |
| Wavelength： |
850nm 1310nm 1490nm 1550nm 1625nm 1650nm 1310/1550nm Others |
Flyin Optronics' 1x1 Mechanical Optical Switch is not affected by the polarization and wavelength. It supports all wavelength at 850nm and 1260nm~1650nm, and It provides high reliability, low insertion loss, fast switching speed and bi-directional performance. They are widely used for multiplex OADM, cross connectors OXC, system testing and protection.
| Features | Applications |
| Unmatched Low Cost | Optical Network |
| Low Insertion loss | Protection/Restoration |
| High Channel Isolation | Optical Singnal Routing |
| High Stability, High Reliability | Configurable Optical Add/Drop |
| Epoxy-free on Optical Path | Transmitter and receiver protection |
| Latching and Non-latching | Network Test System |
Mechanical Dimensions
Package Box Dimensions
Flyin’s size for 1x1 switch: 27×12×8.2mm, the package box size for it : 235x165x35mm. It can hold two pieces 1x1 switch.
Flyin’s label on top left corner: 50*30mm with product information and quantity.
Note: Package may change without notice, Flyin reserve all rights.
| Parameter | FY-1×1-MM/SM | |
| Wavelength Range（nm） | 850±40 | 1260~1650 |
| Operating Wavelength | 850 | 1310/1490/1550/1625/1650 |
| Insertion Loss（dB） | Typ:0.5 Max:0.8 | Typ:0.4 Max:0.6 |
| Return Loss（dB） | MM≥30 SM≥50 | |
| Crosstalk（dB） | MM≥65 SM≥70 | |
| Polarization Dependent Loss（dB） | ≤0.05 | |
| WaveLength Dependent Loss（dB） | ≤0.25 | |
| Temperature Dependent Loss（dB） | ≤0.25 | |
| Repeatability（dB） | ≤±0.02 | |
| Power Supply（V） | 3.0 or 5.0 | |
| Lifetime（time） | ≥10^7 | |
| Switch Time（ms） | ≤8 | |
| Transmission Power（mW） | ≤500 | |
| Operating Temperature(℃) | -20~+70 | |
| Storage Temperature(℃) | -40~+85 | |
| Dimension（mm） | （L）27.0×（W）12.6×(H)8.0 | |
1、Specifications may change without notice.
2、Above specification are for device without connector.
| Type | Pin | Electric Drive | Status Sensor | ||||||
| 1×1 | Pin1 | Pin5 | Pin6 | Pin10 | Pin2-3 | Pin3-4 | Pin7-8 | Pin8-9 | |
| Latching | P1-P2 | V+ | GND | -- | -- | Open | Close | Close | Open |
| Light close | -- | -- | GND | V+ | Close | Open | Open | Close | |
| Non-latching | P1-P2 | V+ | -- | -- | GND | Open | Close | Close | Open |
| Light close | -- | -- | -- | -- | Close | Open | Open | Close | |
| Status One | Status Two |
| |
| Specifications | Voltage | Current | Resistance |
| 5V latching | 4.5~5.5 | 36~44mA | 125Ω |
| 5V non-latching | 4.5~5.5 | 26~32mA | 175Ω |
| 3V latching | 2.7~3.3 | 54~66mA | 50Ω |
| 3V non-latching | 2.7~3.3 | 39~47mA | 70Ω |
Company Info
Service Support
Sub-link
Add：Deliwei Industrial Park, Longhua, Shenzhen, China 518109
Tel：+86-755-29048607/85250091/32939610/32939620
Fax：+86-755-29048624
Email：sales@opticres.com
EN
CN
