Description
Parameters
Flyin Optronics offers a full range of Thermal/Athermal AWG products, including 50GHz, 100GHz and 200GHz Thermal/Athermal AWG. Here we present the generic specification for the 40-channel 100GHz Flat Top Thermal AWG (40 channel TAWG) MUX/DEMUX component supplied for use in DWDM system.
Flyin’s 40 channel 100G Thermal AWG(100G TAWG) is designed for use within the C -band release of DWDM system. To decrease the power dissipation of the devices in different environmental conditions, the TAWG package is special designed with selection of reliable thermal plastic with low thermal conduction, and the TAWG operating temperature is controlled by using foil resist heater or Peltier TEC with thermistor temperature sensor. Different input and output fibers, such as SM fibers, MM fibers and PM fiber can be selected to meet different applications. We can also offer different product packages, including special metal box and 19” 1U rackmount.
The planar DWDM components(Thermal/Athermal AWG) from Flyin Optronics are fully qualified according to Telcordia reliability assurance requirements for fiber optic and opto-electronic components (GR-1221-CORE/UNC, Generic Reliability Assurance Requirements for Fiber Optic Branching Components, and Telcordia TR-NWT-000468, Reliability Assurance Practices for Opto-electronic Devices).
| Features | Applications |
| Low Insertion Loss | DWDM transmission |
| Established silica-on-silicon | Wavelength Routing |
| Low PDL | Optical add/drop multiplexing |
| Low chromatic dispersion | |
| Telcordia GR-1221-CORE qualified |
| Parameter | Specification | |||
| MIN | Typ | Max | ||
| Number of Channels | 40 | |||
| Number Channel Spacing（GHz） | 100 | |||
| Cha. Center Wavelength（nm） | C-Band | |||
| Clear Channel Passband(nm) | ±0.1 | |||
| Wavelength Stability（nm） | ±0.005 | |||
| -1 dB Channel Bandwidth（nm） | 0.4 | |||
| -3 dB Channel Bandwidth（nm） | 0.6 | |||
| Optical Insertion Loss at ITU grid（dB） | 4.5 | 6.0 | ||
| Isolation（dB） | Adjacent | 25 | ||
| Non-Adjacent | 30 | |||
| Total Channel Isolation | 22 | |||
| Insertion Loss Uniformity（dB） | 1.0 | 1.5 | ||
| Directivity (Mux Only)（dB） | 40 | |||
| Insertion Loss Ripple（dB） | 0.5 | |||
| Optical Return loss（dB） | 40 | |||
| PDL/Polarization Dependent Loss in Clear Channel Band（dB） | 0.3 | 0.5 | ||
| Polarization Mode Dispersion（ps） | 0.5 | |||
| Maximum Optical Power（mW） | 23 | |||
| MUX/DEMUX input/ output Monitoring range(dB/℃) | -35 | +23 | ||
| Operating Temperature(℃) | -5 | +25 | +65 | |
| Operating Humidity(%RH) | 5 | 95 | ||
| Storage Temperature(℃) | -40 | +85 | ||
| Storage Humidity(%RH) | 5 | 95 | ||
| Package Size(mm) | L150×W65×H16 | |||
| Size between screws(mm) | 140 x 58 | |||
1、IL Represents the worst case over a +/-0.01nm window around the ITU wavelength;
2、PDL was measured on average polarization over a +/- 0.01nm window around the ITU wavelength.
Flyin Optronics offers a full range of Thermal/Athermal AWG products, including 50GHz, 100GHz and 200GHz Thermal/Athermal AWG.Here we present the generic specification for the 40-channel 100GHz Flat Top Thermal AWG (40 channel TAWG) MUX/DEMUX component supplied for use in DWDM system.
| Band： |
C-Band L-Band C+L-Band Special |
| Spacing： |
50G 100G Special |
| Number of Channels： |
16 32 40 48 Special |
| Filter Shape： |
Gaussian Broad Gaussian Flat Top |
| Package： |
Module Rack Special |
| Fiber Length： |
0.5m 1m 1.5m 2m 2.5m 3m Specify |
| In/Out Connector： |
None FC/APC FC/PC SC/APC SC/PC LC/APC LC/PC ST/UPC Specify |
| 1st Channel： |
H58 C59 H59 C60 Special |
Flyin Optronics offers a full range of Thermal/Athermal AWG products, including 50GHz, 100GHz and 200GHz Thermal/Athermal AWG. Here we present the generic specification for the 40-channel 100GHz Flat Top Thermal AWG (40 channel TAWG) MUX/DEMUX component supplied for use in DWDM system.
Flyin’s 40 channel 100G Thermal AWG(100G TAWG) is designed for use within the C -band release of DWDM system. To decrease the power dissipation of the devices in different environmental conditions, the TAWG package is special designed with selection of reliable thermal plastic with low thermal conduction, and the TAWG operating temperature is controlled by using foil resist heater or Peltier TEC with thermistor temperature sensor. Different input and output fibers, such as SM fibers, MM fibers and PM fiber can be selected to meet different applications. We can also offer different product packages, including special metal box and 19” 1U rackmount.
The planar DWDM components(Thermal/Athermal AWG) from Flyin Optronics are fully qualified according to Telcordia reliability assurance requirements for fiber optic and opto-electronic components (GR-1221-CORE/UNC, Generic Reliability Assurance Requirements for Fiber Optic Branching Components, and Telcordia TR-NWT-000468, Reliability Assurance Practices for Opto-electronic Devices).
| Features | Applications |
| Low Insertion Loss | DWDM transmission |
| Established silica-on-silicon | Wavelength Routing |
| Low PDL | Optical add/drop multiplexing |
| Low chromatic dispersion | |
| Telcordia GR-1221-CORE qualified |
| Parameter | Specification | |||
| MIN | Typ | Max | ||
| Number of Channels | 40 | |||
| Number Channel Spacing（GHz） | 100 | |||
| Cha. Center Wavelength（nm） | C-Band | |||
| Clear Channel Passband(nm) | ±0.1 | |||
| Wavelength Stability（nm） | ±0.005 | |||
| -1 dB Channel Bandwidth（nm） | 0.4 | |||
| -3 dB Channel Bandwidth（nm） | 0.6 | |||
| Optical Insertion Loss at ITU grid（dB） | 4.5 | 6.0 | ||
| Isolation（dB） | Adjacent | 25 | ||
| Non-Adjacent | 30 | |||
| Total Channel Isolation | 22 | |||
| Insertion Loss Uniformity（dB） | 1.0 | 1.5 | ||
| Directivity (Mux Only)（dB） | 40 | |||
| Insertion Loss Ripple（dB） | 0.5 | |||
| Optical Return loss（dB） | 40 | |||
| PDL/Polarization Dependent Loss in Clear Channel Band（dB） | 0.3 | 0.5 | ||
| Polarization Mode Dispersion（ps） | 0.5 | |||
| Maximum Optical Power（mW） | 23 | |||
| MUX/DEMUX input/ output Monitoring range(dB/℃) | -35 | +23 | ||
| Operating Temperature(℃) | -5 | +25 | +65 | |
| Operating Humidity(%RH) | 5 | 95 | ||
| Storage Temperature(℃) | -40 | +85 | ||
| Storage Humidity(%RH) | 5 | 95 | ||
| Package Size(mm) | L150×W65×H16 | |||
| Size between screws(mm) | 140 x 58 | |||
1、IL Represents the worst case over a +/-0.01nm window around the ITU wavelength;
2、PDL was measured on average polarization over a +/- 0.01nm window around the ITU wavelength.
Company Info
Service Support
Sub-link
Add：Deliwei Industrial Park, Longhua, Shenzhen, China 518109
Tel：+86-755-29048607/85250091/32939610/32939620
Fax：+86-755-29048624
Email：sales@opticres.com
EN
CN
