FLY 1000R Series Optical Transform Unit is a high performance, low-power optical transmission system unit, mainly for optical regeneration, re-amplifying, re-shaping the signals in the transmission process. It can save optical fiber resources and networking cost effectively, and solves the problem that the transmission distance is too long to transmit. With advantages of small volume optical signal, economy and safety, convenient construction and etc, it is widely used in various optical transmission fields and long-distance trunk transmission.

Optical line protection system is combined of OLP-Optical Line Protection and operation maintenance terminal. It can realize optical power monitoring、optical line auto-switching and network management etc. In optical communication network, OLP monitors optical power of optical fiber and standby optical fiber at real time. In case the current optical power of optical fiber is less than pre-set switching threshold value, then alarm is on and it would switch to standby optical fiber automatically to protect optical transmission system line. OLP can provide a protection scheme for all routes and main lines easily with low cost, can protect all networks which needs optical line switching, all these above can make an optical communication network with no-block、high reliability、safety and high anti-disaster strength.

DCM Dispersion Compensator has the capability of slope compensation which can supply the broad-band dispersion slope compensation for SMF-28 fiber (G.652) in whole C-band to optimize the system residual dispersion. With the mature and reliable optical fiber processing, the performance of optical transmission system can be sharply improved. The dispersion range of 1550nm wavelength can achieve -10 ~ -2100ps/nm. Special requirements in central wavelength and dispersion can be provided.

Flyin Optronics’ FM-11 series Ethernet media converter can interconvert electrical signals of 10Base-T and 100Base-TX twisted pairs with optical signals of 100Base-FX. It extends the network transmission distance from 100m via copper cables to 120km via fiber optical cable. It enables the data to transmit in two different mediums of electrical and optical networks either by the technology of data link L2 store-and-forward, or by the one of PHY L1 cut-through). It supports transmission in multi-mode dual fiber, single-mode dual fiber, single-mode single fiber.

FLY-1F1T series media converter is 10/100M adaptive Ethernet optical media converter external power supply that can be twisted pair electrical 10/100BASE-TX and 100BASE-FX optical signal conversion. It will network transmission distance limit 100 meters from the copper wire extending to 2km (multimode fiber), 100 km (single-mode fiber) can easily achieve HUB, SWITCH, servers, terminals and remote terminal interconnection between. FLY-1F1T series Ethernet optical media converter plug and play, can be used alone, it can also be integrated in the multi-machine use the same chassis.

Flyin’s compact size Coarse Wavelength Division Multiplexers(Mini CWDM, Compact CWDM, CCWDM), are integrated optical modules using Flyin’s proprietary optical bench platform which can significantly improve optical performance, while also reduce manufacturing cost. Compare to the common standard CWDM module, Flyin's Mini CWDM takes much smaller package size. Much space can be saved in the application and meanwhile the performance and parameters are also better.All Flyin's CWDM modules are Telcordia qualified.(Meet TELCORDIA GR-1221-CORE)