Flyin Optronics' BIDI SFP transceivers are high performance, cost effective modules supporting data-rate of 155M-2.5Gbps and 300m-120km transmission distance.

Flyin Optronics’ BIDI SFP+ Transceivers are Small Form Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps,it designed to be compliant with SFF 8472 and SFP+ MSA. The module data link up to 10km or 40km in 9/125um single mode fiber. The optical output can be disabled by a LVTTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.

Flyin Optronics’ BIDI XFP Transceivers is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 11.3Gb/s, it designed to be compliant with XFP MSA. The transceiver module comprises a transmitter with a 1270/1330nm DFB laser transmitter, an integrated 1330/1270nm detector preamplifier(IDP) mounted in an optical header and a limiting post-amplifier IC, it’s data link up to 10km or 40km in 9/125um single mode fiber.

2108 is a cost effective, 1 RU chassis and multi-service WDM transmission platform which provides 8 wavelengths for point to point application, or 4 wavelengths ring application per device, more wavelengths application is possible by stacking multiple boxes at each location. Each channel port supports bit rate from 1Gb/s to 10Gb/s. It integrates 3R (CDR) for every channel to get better performance. LLF and TX sync functions are also supported, and can be configured by software. It supports 1+1 optical channel and optical line protection. It is stackable for future expansion. 2108 complies with standard of ITU G.709, FCC, RoHS and VCCI.

FLY 1000R Series Optical Transform Unit is a high performance, low-power optical transmission system unit, mainly for optical regeneration, re-amplifying, re-shaping the signals in the transmission process. It can save optical fiber resources and networking cost effectively, and solves the problem that the transmission distance is too long to transmit. With advantages of small volume optical signal, economy and safety, convenient construction and etc., it is widely used in various optical transmission fields and long-distance trunk transmission.