Flyin Optronics Co.,Ltd

World’s Leading Optical Devices Manufacturer

Home

WDM System

EDFA

EDFA for DWDM System

EDFA for DWDM System

FLY 1000R Series Optical Transform Unit is a high performance, low-power optical transmission system unit, mainly for optical regeneration, re-amplifying, re-shaping the signals in the transmission process. It can save optical fiber resources and networking cost effectively, and solves the problem that the transmission distance is too long to transmit. With advantages of small volume optical signal, economy and safety, convenient construction and etc, it is widely used in various optical transmission fields and long-distance trunk transmission.

Input Power:

Pre

On-Line

Booster

Other

Output Power:

-10dBm

...

24dBm

Other

Voltage1:

110VAC

220VAC

110-220VAC

-48VDC

Other

Voltage2:

110VAC

220VAC

110-220VAC

-48VDC

Other

W/O

Interface:

SC/PC

FC/PC

LC/PC

Other

ISNMP:

W/O

W

Reply Within 12 Hours

Description

Parameters

PDF

FLY 1000R Series Optical Transform Unit is a high performance, low-power optical transmission system unit, mainly for optical regeneration, re-amplifying, re-shaping the signals in the transmission process. It can save optical fiber resources and networking cost effectively, and solves the problem that the transmission distance is too long to transmit. With advantages of small volume optical signal, economy and safety, convenient construction and etc, it is widely used in various optical transmission fields and long-distance trunk transmission.

Features
Low Noise Figure: Typical 4.5
High Flatness: Typical 1dB
Cover Whole C-Band: Carrier 40 or 80 CHs
Redundancy hot swap power module: 110/220VAC and 48VDC can plug Mix
Perfect Network Interface: Ethernet, RS-485 and RS-232 port
Support Telnet Interface and SNMP network management
Gain can be adjustable by network and manual
High precise AGC and ATC circuit
High saturation output power
Flexible Mechanics and circuit structure(Module,1U rack and Gain Block)
Compatible with Telecordia GR1312-CORE
Applications
Pre-Amplifier
Online Amplifier
Booster Amplifier
DWDM Optical System

Mechanical Structure

483*236*44(mm)

The production workshop show

Optical Characteristics

Parameter Symbol Min Typ Max Unit
Wavelength λC 1529 1550 1564 nm
Saturation output power(1) Po - - 20 dBm
Input Power Pi -35 - +6 dBm
Gain G - 20 - dB
Flatness FL 1.0 1.5 dB
Noise Figure(2) NF - 4.5 - dB
Output power stability ΔPo - ±0.05 ±0.1 dB
Return Loss RL - - -45 dB
PDG PDG - - 0.3 dB
PMD PMD - - 0.5 ps

1、Optional

2、Test at 0dBm input

Electric Characteristics

Parameter Symbol Min Typ Max Unit
Voltage Supply Vps 85/170 110/220 132/264 VAC
Consumption P - - 18 W

1、10VAC,220VAC and -48VDC is optional

2、Actual consumption depend on the output power and environment temperature

Environmental Characteristics

Parameter Symbol Min Typ Max Unit
Operating Temperature Tw -5 - 60
Storage Temperature Ts -40 - 80
Humidity - 10 - 85 %

1、Non-condensing

DownLoad

BIDI XFP Transceiver EDFA for DWDM System
Copyright © 2012-2016 Flyin Optronics Co.,Ltd. All Rights Reserved.